Stirrer Accessories
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 525mm OAL, 66mm OD Retreating Blade, Fits Reactors up to 1000mL
Stirring Shaft, PTFE Covered SS, 525mm OAL, 66mm OD Retreating Blade, Fits Reactors up to 1000mL
Chemglass Life Sciences Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint
Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint. PTFE stirrer bearing with a hose connection for vacuum or inert gas source on a single neck flask. Grease-free design has only glass and PTFE in contact with the reaction, and can be used under moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint size, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. Saddle o-ring provides vacuum tight seal and is replaceable at a fraction of the cost of the entire bearing. Hose connection is 10mm at the largest serration. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Flex-Drive Coupling for 10mm OD Glass Stirrer Shaft
Flex-Drive Coupling for 10mm OD Glass Stirrer Shaft. The design of our Flex-Drive stirrer coupling eliminates the need to use rubber hose or universal adapters to attach your glass stirrer shafts to overhead motors. Coupling incorporates a 3in long epoxy coated spring to compensate for misalignment and to help isolate breakage. Lower end of coupling has a Celcon compression nut which secures the glass shaft to the coupling via a silicone rubber insert. The silicone insert, along with the knurled compression nut, permits hand tightening of both ground and polished shafts. Top epoxy coated bushing is fitted with an allen screw and will accept 5/16in O.D. stirrer motor shafts.
Chemglass Life Sciences Stirrer Assembly, Macro, Chem-Stir, 24mm x 110mm Blade Fits 2L-20L Flask, 45/50 Bearing, 10mm OD x 515mm Stirrer Shaft
Stirrer Assembly, Macro, Chem-Stir, 24mm x 110mm Blade Fits 2L-22L Flask, 45/50 Bearing, 10mm OD x 515mm Stirrer Shaft. Assembly consists of a 10mm OD Chem-Stir stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.
Ace Glass, Inc. 6mm 32cm solid glass stir shaft, precision ground, button type
6mm 32cm solid glass stir shaft, precision ground, button type
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, Glass Agitator, Three-Blade, 445mm OAL, for 500mL Reactors, 66mm OD Agitator
Stirring Shaft, 10mm, Polished, Glass Agitator, Three-Blade, 445mm OAL, for 500mL Reactors, 66mm OD Agitator. Shaft is precision ground and polished to fit our CG-2076 and CG-2077 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.
Thermo Scientific™ Cimarec™ Biosystem 40B Controller
Enable synchronized operation of two stirrers with Thermo Scientific™ Cimarec™ Biosystem 40B Controller.
Fisherbrand™ Universal Swivel Clamp for Overhead Stirrers
The universal swivel clamp lets you set the stirrer to any compound angle for best stirring action.
Fisherbrand™ Spider Support Stands for Overhead Stirrers
Able to clamp on the edge of pails, drums, square or rectangular tanks.
Fisherbrand™ Vinyl Chuck Guard
For use with Fisherbrand Overhead Stirrers
Heidolph™ Magnetic Stirrer Accessory, Boss Head
For use with Heidolph SilentCrusher M and Heat-On products
Caframo™ Chuck Guard Kit
For retrofitting Caframo Overhead Stirrers made before 2004 (14-500-311, 14-500-10, 14-500-11 and 14-500-12)
Heidolph™ Stirrer Chucks for RZR Overhead Stirrer
Accessories for use with RZR Overhead Stirrers